Insulated terminals are also known as cold-pressed terminals, electronic connectors, and all air joints are cold-pressed terminals. It is an accessory product used to realize electrical connection and is divided into the category of connectors in the industry. With the increasing degree of industrial automation, the requirements of industrial control are becoming more and more strict and precise, and the consumption of terminal blocks is gradually increasing. With the development of the electronics industry, there are more and more application fields and types of terminal blocks. In addition to PCB terminals, the most widely used are metal continuous terminals, nut terminals, spring terminals and so on.
Cold-pressed connection is to insert two threaded steel plates to be connected into a special steel connection sleeve, and use a special high-pressure steel bar connection machine to apply pressure to the outer wall of the steel sleeve, so that the steel sleeve is plastically deformed by cold extrusion. The walls are tightly embedded in the toothed transverse rib gaps of the rebar. Increase the pressure so that the metal connecting the inner wall of the casing tightly clamps the steel bar, and the two steel bars are connected into one through the copper sleeve. The force of cold bonding is mainly transmitted through the shear force between the steel sleeve and the transverse rib of the steel bar after deformation.
Type: round pre-insulated terminal, cold-pressed terminal, fork-shaped pre-insulated terminal, pin-shaped pre-insulated terminal, sheet-shaped pre-insulated terminal, bullet-shaped fully insulated terminal terminal, long intermediate joint, short intermediate joint, round bare terminal , Fork-shaped bare terminals, male and female pre-insulated terminals, tubular pre-insulated terminals, tubular bare terminals, needle-shaped bare terminals.
Post time: Sep-05-2022